XMFC 550-MX Series Low Voltage Motor Vector Control Inverter
Item | Specification | |
Power supply | Rated voltage | 3 phase 380V~480V |
Allowed Voltage Fluctuations | -15%~+10% | |
Rated frequency | 50/60Hz | |
Allowed Frequency Fluctuations | ±5% | |
Output | Max output voltage | Three-phase 380V~480V (Go after the input voltage) |
Max Output frequency | 500Hz | |
Carrier Frequency | 0.5~16kHz (automatic adjustment according to the temperature, and the adjustment range differs for different models ) | |
Overload capacity | 150% rated current 60s; 180% rated current 3s | |
Basic Functions | Frequency setting resolution | Digital setting: 0.01HZ Analog setting: max frequency × 0.025% |
Control Mode | Open Loop Vector Control Closed Loop Vector Control V/f Control | |
pull-in torque | 0.3HZ/150% (SVC) 0 Hz/180% (FOC) | |
Speed range | 1:200 (SVC) 1:1000 (FOC) | |
Speed Stabilizing accuracy | ±0.5% (SVC) ±0.02% (FOC) | |
Torque Control Precision | ±5% (FOC) | |
Torque boost | Automatic torque boost; Manual torque increase 0.1%~30.0% | |
V/F Curve | Three ways: linear type; multi-point type; N-th power V/F curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power) N次方 | |
Acceleration and deceleration curve | Linear or S-curve acceleration and deceleration; Four kinds of acceleration and deceleration time, the range of acceleration and deceleration time is 0.0~6500.0S | |
DC braking | Frequency of DC braking: 0.00HZ ~ max frequency Braking time: 0.0S~36.0s Braking action current value: 0.0%~100.0% | |
Jogging control | Jogging frequency range:0.00HZ~50.00HZ Jog acceleration- deceleration time:0.0s~6500.0s | |
Simple PLC, multi-stage speed operation | Up to 16-stage speed operation via built-in PLC or control terminal | |
Built-in PID | closed-loop control realized in process control applications | |
Overvoltage and overcurrent stall control | Automatically limit current and voltage during operation to prevent fault shutdown due to frequent over-current and over-voltage | |
Fast current limiting function | Minimize shutdown due to overcurrent to ensure normal operation of the variable frequency drive. | |
Control interface | Digital input | 5 multi-function digital inputs, one of which supports max 100kHZ pulse input function |
Analog input | 2 analog inputs, both supporting 0~10V or 0~20mA analog input, switch voltage or current input via jumper | |
Digital output | 2 open-collector digital outputs, one of which supports max 100kHZ square wave output | |
Analog output | 1 analog output, supporting 0~10V or 0~20mA analog output, switch voltage or current output via jumper | |
Relay output | 1-way relay output, including 1 normally open contact, 1 normally closed contact | |
Standard communication interface | 1 channel RS485 communication interface | |
Expansion interface | Function expansion interface | Connectable to IO expansion card, PLC programmable expansion card, etc. |
Encoder control interface | Can be connected to compatible differential and OC encoder expansion cards, etc. | |
Operation panel | LED digital display | 5-digital display of parameters and settings |
Indicator light | 4 status indications, 3 unit indications | |
Button Function | 5 function buttons including 1 multi-function button. The function can be set via parameter P0-00 | |
Shuttle Knob function | Add, minus and confirm | |
Parameter copy | Fast upload and download parameters | |
Protective function | Basic protection | Phase loss, overvoltage, undervoltage, overcurrent, overload, overheat, interphase short circuit, grounding fault |
Environment | Operation condition | Indoor, no conductive dust, oil pollution, etc. |
Operating ambient temperature | -10°C ~ +40°C (40°C~50°C, derate 1.5% for every 1°C increase in temperature) | |
Humidity | Less than 95%RH, no condensation | |
Altitude | No derating below 1000m, derate by 1% for every 100m elevation above 1000m | |
Ambient temperature for Storage | -20℃~+60℃ | |
Vibration | Less than5.9m/s²(0.6g) | |
Installation method | Wall-mounted or flush-mounted installation in the cabinet (requires optional installation accessories) | |
IP grade | IP20 |
-
Open-loop vector control, closed-loop vector control and VF control.This model is suitable for general-purpose loads.Built-in DC reactor is applied in 11KW and above models.Support wall-mounted, embedded, parallel, up-and-down and other installation methods.Flexible application expansion functions, mainly including IO expansion card, encoder expansion card and PLC expansion card.Rich communication expansion, CANopen, Profibus, EtherCAT and other communication expansion cards can be connected through the expansion interface.LED can be introduced to the operation panel.All series support common DC bus and DC power supply.
Model | Adapted Motor Power kW | Rated Input Capacity kVA | Rated Input Current A | Rated Output Current A |
XMFC550-3P4-1K50G-BEN-20 | 1.5 | 3.2 | 4.8 | 4 |
XMFC550-3P4-2K50G-BEN-20 | 2.2 | 4.5 | 6.8 | 5.6 |
XMFC550-3P4-4K50G-BEN-20 | 4 | 7.9 | 12 | 9.7 |
XMFC550-3P4-5K50G-BEN-20 | 5.5 | 11 | 16 | 13 |
XMFC550-3P4-7K50G-BEN-20 | 7.5 | 14 | 21 | 17 |
XMFC550-3P4-11K50G-BEN-20 | 11 | 16 | 24 | 25 |
XMFC550-3P4-15K50G-BEN-20 | 15 | 21 | 32 | 33 |
XMFC550-3P4-18K50G-BEN-20 | 18.5 | 26 | 39 | 40 |
XMFC550-3P4-22K50G-BEN-20 | 22 | 29 | 44 | 45 |
XMFC550-3P4-30K50G-BEN-20 | 30 | 39 | 60 | 61 |
XMFC550-3P4-37K50G-BEN-20 | 37 | 48 | 73 | 74 |
XMFC550-3P4-45K50G-BEN-20 | 45 | 58 | 88 | 90 |
XMFC550-3P4-55K50G-BEN-20 | 55 | 71 | 107 | 109 |
XMFC550-3P4-75K50G-BEN-20 | 75 | 96 | 145 | 147 |
XMFC550-3P4-90K50G-BEN-20 | 90 | 114 | 174 | 176 |
XMFC550-3P4-110K50G-BEN-20 | 110 | 139 | 211 | 211 |
XMFC550-3P4-132K50G-BEN-20 | 132 | 167 | 253 | 253 |
XMFC550-3P4-160K50G-BEN-20 | 160 | 201 | 306 | 303 |
XMFC550-3P4-185K50G-BEN-20 | 185 | 233 | 353 | 350 |
XMFC550-3P4-200K50G-BEN-20 | 200 | 250 | 380 | 378 |
XMFC550-3P4-220K50G-BEN-20 | 220 | 275 | 418 | 416 |
XMFC550-3P4-250K50G-BEN-20 | 250 | 312 | 474 | 467 |
XMFC550-3P4-280K50G-BEN-20 | 280 | 350 | 531 | 522 |
XMFC550-3P4-315K50G-BEN-20 | 315 | 393 | 597 | 588 |
XMFC550-3P4-355K50G-BEN-20 | 355 | 441 | 669 | 659 |
XMFC550-3P4-400K50G-BEN-20 | 400 | 489 | 743 | 732 |
XMFC550-3P4-450K50G-BEN-20 | 450 | 550 | 835 | 822 |
0102030405060708
description1