English
Leave Your Message
CMC-MX Low Voltage Motor Soft Starter

High/Low Voltage Soft Starter

CMC-MX Low Voltage Motor Soft Starter

Control Power AC110~220V±15%, 50/60HZ
Three-phase Power standard wiring AC 380V, inner delta wiring AC 380V±30%
Nominal Current 15~560A, with 18 rated values
Adaptive Motor universal squirrel cage AC asynchronous motor
Start Ramp Mode current limiting soft start, voltage ramp start
Stop Mode soft stop and free stop
Logical Input impedance: 1.8Ω, power supply: +15V
Start Frequency available for frequent or non-frequent start, no less than 10 times of start per hour is recommended
Protective Function phase failure, over current, short circuit, SCR protection, overheat, under load, phase current unbalance, wiring and inner fault
Protection Grade IP00, IP20 Cooling Type air natural, air forced
Mounting Type wall mounted Ambient Temperature -25~+45℃
Relevant Humidity ≤95% (20±5℃) Brand Name SIMO MOTOR
when sea altitude exceeds 2000 meters, soft starter should be de-rated for use
Free of combustible, explosive and corrosive gas, no conductive dust
Indoor installation, good ventilation, vibration: <0.5G

    Description

    • CMC-LX series motor soft starter is a new type of motor starting and protection device that combines power electronic technology, microprocessor with automatic control. This type of soft starter can start or stop the motor smoothly without steps, avoid mechanical and electrical shocks caused by traditional staring methods such as direct start, △/Y start, self-coupling buck start, and effectively reduce the starting current and power distribution capacity, avoiding costs in expanding capacity. Besides, CMC-LX series motor soft starter has internal integrated current transformer and contactor, so users do not need for external connection.

    installation diagram

    CMC-MX Low Voltage Motor Soft Starter (2)d6b

    Motor Parameters

    Adaptive motor power (kW) Model of soft starter Rated current (A) Model of bypass contactor Size of primary line (copper line)
    7.5 CMC-008-3 18 CJX4-25 4 mm ²
    11 CMC-011-3 24 CJX4-32 6mm ²
    15 CMC-015-3 30 CJX4-32 10mm ²
    18.5 CMC-018-3 39 CJX4-40 10mm ²
    22 CMC-022-3 45 CJX4-50 16mm ²
    30 CMC-030-3 60 CJX4-63 25mm ²
    37 CMC-037-3 76 CJX4-80 35mm ²
    45 CMC-045-3 90 CJX4-95 35mm ²
    55 CMC-055-3 110 CJX4-115F 35mm ²
    75 CMC-075-3 150 CJX4-150F 50mm ²
    90 CMC-090-3 180 CJX4-185F 30x3 copper bar
    110 CMC-110-3 218 CJX4-225F 30x3 copper bar
    132 CMC-132-3 260 CJX4-265F 30x4 copper bar
    160 CMC-160-3 320 CJX4-330F 30x4 copper bar
    185 CMC-185-3 370 CJX4-400F 40x4 copper bar
    220 CMC-220-3 440 CJX4-500F 40x4 copper bar
    250 CMC-250-3 500 CJX4-500F 40x4 copper bar
    280 CMC-280-3 560 CJX4-630F 40x4 copper bar
    315 CMC-315-3 630 CJX4-630F 40x5 copper bar
    400 CMC-400-3 780 JWCJ20-800 50x5 copper bar
    470 CMC-470-3 920 JWCJ20-1000 50x6 copper bar
    530 CMC-530-3 1000 JWCJ20-1000 50x6copper bar

    Application

    description1